9 in 1 Multi-functional skin beauty equipment (HB-61)

9 in 1 Multi-functional skin beauty equipment 1. Facial skin care, skin care 2. Use for salon and home 3. Make private logo

9 in 1 high frequency multifunctional beauty equipment

  

Vacuum,Spray

1-     Connect small suction glass tube to the suction/spray hose, put the hose to the suction port of machine, press the small hole on the small glass tube, then machine is ready for suction operation . 

2-      Connect spray bottles to the suction/spray hose, put the hose to the spray port of machine, press the small hole on spray bottle then the machine is ready for spray like mist.

3-      If you turn on the machine without vacuum force, belong to the normal phenomenon, slightly etc. a short moment can immediately recover normally. The vacuum force size adjustable stanza metals knob, the agreeable hour hand is big

Ultrasonic

1-      Before operation, clean face well with proper cream .

2-      Wash off the cream then steam face 10 minutes.

3-      Clear out the dirty for strengthen ultrasonic working.

4-      Spread shrink water o the face and tap it gently then wipe off it.

5-      Test skin conditions then spread the suitable medicine cream on the face .

6-      Turn on the machine then adjust the power of probe to fit skin well.

7-      Set timer to show 15minutes the normal work time.

8-      Press the button to choose type of wave shape out.

9-      Massage on skim covered medicine cream with probe.

10-    After over the operation, turn off the machine and clean the dirty probe.

11-    If use the machine coming with the Chinese traditional medicine mask powder, it will have better effect.

High-Frequency

1-      Insert the Ozone electrode into the handle and keep touch well.

2-      Connect the plug to the power outlet then turn on the machine.

3-      Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.

Brush

1- Select appropriate brush and insert into the head .It will be lock in place. When here a “ka” sound .

2- Turn switch “ON” Set speed according to client’s skin condition and procedure.

3- The way to change brush: Turn switch “OFF” use a slight force to pull off the brush. Insert another brush as needed turn switch“ON”.

4-Viscose sponges and warm water may be used to remove excess treatment product from client’s skin.

Remove spot

   1- Insert the pin into the handle.

    2- Clean the treat area with alcohol then spread it with anesthetic 3 minutes.

    3- Turn on the machine and ready for operation.

    4- When operating, care the currency lever and adjust a proper energy lever to avoid hurt.

Cool Light Magnifying Lamp

1- First the customer sits down below the magnifying lamp.

2- Turn on the machine, and make the magnifying lamp to focus on the treat skin area.

3- Adjust and have a suitable distance between the lamp and skin.

4- Then test carefully each part of treat skin.

Hot Steamer

1- First clean face (or wounded area) before operation.

2- The medicine cream used should be mucous to be absorbed in better by skins, at the same to avoid burning the probe.

3- Work time set to 15minutes and it is enough at the normal conditions.

4- Don’t make the probe to be near eyes or touch eyes to avoid hurt.

5- Don’t make the probe in work but operate to touch skin, for to do that is easy to burn the probe for over heat.

6- There are three types of glasses of which should be used separately according to any specific parts of the body.

Function

1       Vacuum

2       Spray

3       Remove Spot

3      Woods lamp

4       Ultrasonic

5       High-Frequency

6       Brush

7      Remove Spot

8      Cool Light Magnifying Lamp

9      hot Steamer

9 in 1 Multi-functional skin beauty equipment (HB-61)